TECKNIT 0005 ONE COMPONENT FLEXIBLE ELECTRICALLY CONDUCTIVE POLYOLEFIN SEALANT

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: Parker Chomerics TECKNIT 0005 is a one component silver-plated glass filled conductive sealant specially formulated to remain flexible for gaps or seams meant to be disassembled
Опции полимерных материалов: Polyolefin
Материал наполнителя: Silver-plated glass
Тип упаковки: 1 pint aluminum can
В комплект входит грунтовка: Not required
Коэффициент: 1-part
Цвет: Beige
Объемное сопротивление: 0.005 Ω-cm
Прочность соединения внахлест при сдвиге: 28 kPa
Удельный вес: 1.7
Дюрометр: N/A
Рабочая температура: -54 to 94 °C
Срок хранения: 9 Months
Толщина пленки: 0.13 to 1.27 mm
Customer Value Proposition:

TECKNIT 0005 is a silver-plated glass filled, one-component conductive polyolefin, designed for use as a fillet, gap filler and seam sealant on electrical enclosures for EMI shielding or electrical grounding. Its nonhardening characteristic makes it particularly suited for shielding joints and seams which are likely to be disassembled or applications where uneven surfaces and thermal expansion may be encountered. Minimum recommended bond line for TECKNIT 0005 is 0.005 inches (0.13 mm). TECKNIT 0005 dries in minutes and develops its final material properties in 24 hours. The compound remains permanently flexible and adherent with no tendency to crack or pull away from the substrate. Some surface crusting may be experienced, but TECKNIT 0005 will remain pliable below the surface. TECKNIT 0005 is ozone resistant and has good weathering resistance. Typical applications include access panels, shielded room joints, temporary military shelters, hardware, bulkhead feed through fittings, and building conduits.


Features and Benefits:

• One component
• Easy to use, no weighing or mixing required.
• Silver glass filler
• Excellent conductivity 0.005 ohm-cm, low cost ($/cc)
• Polyolefin binder
• 5 minute working life, 24 hrs for final
properties to develop, remains flexible,
No corrosive by-products generated during
drying to damage substrate.
• Light weight
• More coverage per gram of material, minimal
weight added to assembly or vehicle.
• Thixotropic cream
• Easy to dispense, apply and spread. Not recommended for use on overhead and vertical surfaces.