LinerSCAN - Cylinder Liner Monitor

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: Parker Kittiwakes LinerScan system is designed to remove the uncertainty of cylinder damage resulting from low fuel quality, slow steaming, low sulphur levels, lower oil feed rates and cylinder oil formulation changes.
Для типа жидкости: Cylinder Oil, Cylinder Oil
Рабочее давление: 10 barg, 145 psi
Технологии: Filtration, Hydraulics
Минимальная температура жидкости: 10 °C, 50 °F
Максимальная температура жидкости: 65 °C, 149 °F
Присоединительный размер впуска воздуха: 1/2” BSP, 1/2” BSP
Рабочая температура: 0 to 65 °C, 32 to 149 °F
Максимальное рабочее давление: 10 barg, 145 psi
Подразделение: Hydraulic & Industrial Process Filtration Division EMEA
Промышленность: Marine
Тип продукта: Condition Monitor
Модель продукта: Particle Detector/Counter
Расход: > 30 L/min
Размер порта: 1/2 inch
Тип порта: BSP
Метод измерения: Ferrography
Требования к электроснабжению: 24 VDC
Интерфейс связи: CANbus
Сигнальный выход: 4 to 20 mA
Длительность цикла: 30 min
Соблюдены требования технических условий: CE Certification
Степень защиты, обеспечиваемая оболочкой: IP65
Материалы изготовления: Mild Steel
Материал уплотнения: Fluorcarbon
Материал корпуса: Mild Steel
Вес: 17 kg
Высота: 300 mm
Длина: 300 mm
Ширина: 94 mm
Бренд: Parker
The world's first real-time alarm system for engine liner wear. LinerSCAN marks a new era in asset protection, providing early warning against critical engine damage whilst providing the information needed to save on lube oil costs.
Parker Kittiwake's LinerScan system is designed to remove the uncertainty on cylinder damage resulting from low fuel quality, slow steaming, low sulphur levels, lower oil feed rates and cylinder oil formulation changes.
Why is it becoming increasingly important to monitor wear?
• Financial savings
• Optimize feed rates
• Highlight problems with low sulphur fuel
• Aid in preventative maintenance
• Increase lifetime of your cylinder liners
• Prevent engine damage and down time

System Benefits:
LinerSCAN provides highly accurate feedback about the wear condition in your engine. Trials have shown that LinerSCAN highlights the first signs of damage earlier than other systems and enables safe reduction of lubricant feed rate. If the wear rate increases during normal conditions the system will generate an alarm which, when connected to the ships alarm, provides instant feedback allowing for immediate action. This allows for preventative maintenance during the ships passage to the next port, or even a route change. LinerSCAN is a fully automated system and can help save money by optimizing the lubricant feed rate, reducing your maintenance loads and by helping you prevent unnecessary engine damage.
• Provides accurate and actionable data on your engine wear levels
• Enables safe reduction of cylinder oil feed rates
• Dramatically reduces engine damage by spotting the first signs of scuffing or piston ring damage
• Highlights the issues caused by fuel problems
• Allows an informed running-in process
• Runs fully automated – with no human interference
• Provides savings immediately after installation
• Simple installation for both new and retrofit

Features:
• Highly capable communications enable the system to link with ship management systems.
• Bespoke user-friendly software interface for data evaluation onboard or in the office.
• LinerSCAN takes the use of oil analysis data a stage further than is possible with laboratory or test kit results
• Reliable and robust – Once installed, the the system requires minimal intervention
• Compact units require little space per cylinder
• LinerSCAN utilises patented ANALEX technology from Parker Kittiwake