MPS-33 Vacuum Pressure Sensors (1 Color Panel Mount) / Parker Pneumatic - Europe

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: MPS-33 pressure sensors have two independent PNP or NPN outputs with an additional 1-5 VDC analog output. The MPS-33 have a red LED pressure display for visual monitoring. Sensors can be used to monitor vacuum pressure and up to 145 psig.
Номинальное давление: 0 - 30 inHg | -14.5 to 72 PSI | 0 to 145 PSI
Отображаемые значения: PSIG | Bar | inHg | mmHg | kPa | kfg | cm3 | mmH2O
Сигнальный выход: (2) PNP with (1) 1-5 VDC | (2) NPN with (1) 1-5 VDC
Электрические соединения: 2 Meter, 5 wire lead wire
Рабочая среда: Air | Non-corrosive Gases | Incombustible Gases
Материал диафрагмы: Silicon
Размер порта: 1/8" Female
Тип порта: NPSF | BSPP
Рабочая температура: 32° to 122° °F, 0° to 50° °C
Напряжение на входе: 12 to 24 VDC + or - 10% or less | Ripple (Vp-p) 10% or less
Тип дисплея: 1 color Red LED, 3 + 1/2 digit, 7 segment
Воспроизводимость: + or - 2% of Full Scale
Соблюдены требования технических условий: IP65 with Dust Tube Connection | CE Marked | EMC-EN61000-6-2: 2001 | Rohs
Материалы изготовления: Housing: ABS (gray) | Pressure Port: Zinc die-cast | Diaphragm: Silicon
Режимы управления: N.O or N.C Output Modes | Units of Measure | Hysteresis or Window Comparative Mode | Output Response Time | Lockable Programming | Minimum Display Value | Maximum Display Valve | Zero Reset | Error Output Mode
Дополнительное оборудование входит в комплект: Panel Mounting Bracket |Surface Mounting Bracket
MPS-33 pressure sensors have two independent open collective transistor type outputs with an additional 1-5 VDC analog output. Each sensor displays the pressure reading on a 1 color Red, LED display panel and includes a two meter grommet lead wire for electrical connection. Solid state outputs are available in PNP or NPN. Sensors can be used to monitor vacuum pressure and up to 145 psig.

Applications for pressure sensors are numerous and important in today's high-tech manufacturing environment. Outputs can be programmed normally passing or non-passing and in either Hysteresis Mode or Window Comparative Modes. In Hysteresis Mode, the user sets the switch point and reversing point. In Window Comparator Mode, the user sets the hi and low pressure band of operation. In addition to electrical outputs, these sensors have additional programming options that can be integrated into the system logic for additional benefits. Choose the best pressure sensor for the application based on pressure range, output type and additional programming options.

• Pressure Range: 0 - 30 inHg, -14.5 to 72 PSI, 0 to 145 PSI
• Display Units Of Measure: PSIG | Bar | inHg | mmHg | kPa | kfg | cm3 | mmH2O
• Output Type: (2) PNP with (1) 1-5 VDC | (2) NPN with (1) 1-5 VDC
• Electrical Connection: 2 Meter, 5 Wire Lead Wire
• Media: Air & Non-corrosive Gases | Incombustible Gases
• Diaphragm Material: Silicon
• Port Size: 1/8" Female
• Port Type: NPSF | BSPP
• Operating Temperature (F): 32° to 122°
• Operating Temperature (C): 0° to 50°
• Power Supply: 12 to 24 VDC + or - 10% or less. Ripple (Vp-p) 10% or less
• Display: 1 color Red LED, 3 + 1/2 digit, 7 segment
• Response Time: < or = 2.5ms (chattering-proof function: 24ms, 192ms, 786m selections)
• Repeatability: + or - 2% of full scale
• Certifications/Approvals: IP65 with dust tube connection, CE marked, EMC-EN61000-6-2: 2001, Rohs
• Current Consumption: